THE EFFECTS OF DISTRIBUTOR DESIGN ON FLUIDIZED-BED HYDRODYNAMIC BEHAVIOR

should be addressed. The distributor was investigated for the purpose of design and scale up of large fluidized-bed combustors. Four orifice plates with different configurations were used to study the effect of distributor design on bubble formation and solid mixing. Experiments were carried out on a three-dimensional fluidized bed of 27.94 cm diameter and a two-dimensional bed with dimensions of 30.48cm ×1.27 cm. Motion pictures were used to study bubble formation and coalescence. Pressure profiles inside the three-dimensional bed were measured for several distributors to study bubble flow patterns, and tracer particles were used to study mixing patterns at various superficial velocities and particle sizes. The results show that the distributor plate with two-size orifices causes a non-uniform gas bubble flow inside the bed. This non-uniform gas bubble flow is associated with variations in local bed density and local voidage. Horizontal or radial solid circulation is also caused by this non-uniform gas bubble flow. The local bed density and voidage variations and the radial solid circulation cause the bubbles to move toward the area above the smaller orifices as the bubbles rise up and coalesce. This reduces the wall effect, and the bed is very uniformly fluidized when the two-size orifice plate with small holes in the center is employed.