Soil sulfur—crop response calibration relationships and criteria for field crops grown in Australia

Accurate definition of the sulfur (S) soil test–crop grain yield increase (response) relationship is required before soil S test measurements can be used to if there are likely to be responses to S fertilisers. An analysis was done using the Better Fertiliser Decision for Crops (BFDC) National Database using a web application (BFDC Interrogator) to develop calibration relationships between soil S tests (KCl-40 and MCP) using a selection of sampling depths and grain relative yields (RY). Critical soil test values (CSTV) and critical soil test ranges (CSTR) were defined at RY 90%. The ability of the KCl-40 extractable S soil test to predict grain yield response to applied S fertiliser was examined for wheat (Triticum aestivum L.) grown in Western Australia (WA), New South Wales (NSW), and Victoria and canola (Brassica napus L.) grown in WA and NSW. A smaller dataset using MCPi-extractable S was also assessed. The WA-grown wheat KCl-40 S CSTV, using sampling depth to 30 cm for soil types Chromosols (Coloured), Chromosols (Sesqui-Nodular), Kandosols (Grey and Yellow), Tenosols (Brown and Yellow), and Tenosols (Grey, Sesqui-Nodular), was 2.8 mg kg–1 with an associated CSTR 2.4–3.2 mg kg–1 and a correlation coefficient (r) 0.87. Similarly, KCl-40 S CSTV was defined using sampling depth to 10 cm for these selected soil types and for wheat grown on Vertosols in NSW. The accuracy of the KCl-40 S CSTV for canola grown in WA was improved using a sampling to a depth of 30 cm instead of 10 cm for all soil types. The canola KCl-40 S CSTV using sampling depth to 30 cm for these soil types was 7.2 mg kg–1 with an associated CSTR 6.8–7.5 and an r value 0.70. A similar KCl-40 S CSTV of 7.0 mg kg–1 was defined using a sampling depth of 10 cm, but the CSTR was higher (6.4–7.7 mg kg–1) and the r value lower (0.43). A lower KCl-40 S CSTV of 3.9 mg kg–1 or 31.0 kg ha–1 using a sampling depth of 60 cm was defined for canola grown in NSW using a limited number of S-rate calibration treatment series. Both MCPi (r = 0.32) and KCl-40 (r