Study on the evolution stages of the flow field induced by an alternating current sliding discharge plasma actuator in different actuation modes

The present study investigates the discharge and flow characteristics of a sliding discharge (SD) driven by alternating current (AC) and negative direct current (DC) high voltage in continuous operation and burst-mode actuation in quiescent air. The burst frequency f is set at 20, 40, 50, and 100 Hz...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Physics of fluids (1994) 2024-06, Vol.36 (6)
Hauptverfasser: Sun, Qijie, Geng, Xi, Li, Zheng, Shi, Zhiwei, Sun, Zhikun, Cheng, Keming
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The present study investigates the discharge and flow characteristics of a sliding discharge (SD) driven by alternating current (AC) and negative direct current (DC) high voltage in continuous operation and burst-mode actuation in quiescent air. The burst frequency f is set at 20, 40, 50, and 100 Hz with a duty cycle τ fixed at 50%. Different actuation cases exhibit similar discharge morphologies and electrical properties. The results indicate that the flow induced by the horizontal body force generated by the SD undergoes the following stages: formation, intensification, accumulation, and stabilization. Based on the effects of the body force, the evolution of the induced flow field can be divided into three stages: the initial stage (starting-vortex stage), the transition stage, and the final stage. In continuous operation, the transition stage is marked by a complex flow structure, while the final stage is distinguished by a deflecting jet. When the burst frequency f  ≤ 50 Hz, the duration of the transition stage increases with the burst frequency, and it becomes transient at f = 100 Hz due to the short voltage input time. Phase-averaged particle image velocimetry results indicate that the final stage of the burst-mode actuation can be categorized into three types mostly based on the interaction of the vortices from the AC and DC electrodes. Compared to the continuous operation, the application of the burst-mode actuation in this study has a shorter transition stage duration, resulting in a more rapid realization of flow control.
ISSN:1070-6631
1089-7666
DOI:10.1063/5.0214445