Temperature dependent behavior of a kA-class superconducting flux pump with a continuous cylindrical stator
A high temperature superconducting (HTS) dynamo is a type of device known as a “flux pump” that can inject DC into a closed superconducting circuit. Here, we report experimental results from a variable-temperature dynamo-type HTS flux pump operated within a cryo-cooled chamber. This device employs a...
Gespeichert in:
Veröffentlicht in: | Applied physics letters 2023-11, Vol.123 (20) |
---|---|
Hauptverfasser: | , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | A high temperature superconducting (HTS) dynamo is a type of device known as a “flux pump” that can inject DC into a closed superconducting circuit. Here, we report experimental results from a variable-temperature dynamo-type HTS flux pump operated within a cryo-cooled chamber. This device employs a “continuous stator” topology, whereby an HTS “coated conductor” is wrapped to form a cylinder around a mechanical rotor such that applied flux from the rotor magnet must always penetrate the stator. This leads to a high current device that can inject >1 kA into a series-connected HTS coil at 53 K. The open-circuit DC output voltage (Voc) from this HTS dynamo has been studied at stator temperatures between 35 and 95 K and attained a maxima at a temperature ∼5 K lower than the stator Tc. At lower temperatures, Voc decreases and falls to zero below ∼40 K. This non-intuitive effect is found to be due to flux-screening by critical currents flowing with the HTS stator, which increase with decreasing temperature. These shielding currents prevent flux from penetrating the HTS stator and, hence, reduce the magnitude of locally induced emf (and thus DC output) within the HTS film. A key implication of these results is that all magnetically driven HTS flux pumps should be operated at temperatures well above their flux-screening point, and this consideration must be taken into account for future designs of multi-kA class HTS flux pumps. |
---|---|
ISSN: | 0003-6951 1077-3118 |
DOI: | 10.1063/5.0169553 |