Fabrication and characterization of variable-focus liquid lens based on coil
This paper presents a coil-based liquid lens (CLL) with a mature and simple fabrication process. A tunable focal length is achieved by changing the liquid–liquid interface curvature using electrowetting on dielectric (EWOD). The lens cavity is a coil wound or stacked by a particular structure named...
Gespeichert in:
Veröffentlicht in: | AIP advances 2022-03, Vol.12 (3), p.035101-035101-5 |
---|---|
Hauptverfasser: | , , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | This paper presents a coil-based liquid lens (CLL) with a mature and simple fabrication process. A tunable focal length is achieved by changing the liquid–liquid interface curvature using electrowetting on dielectric (EWOD). The lens cavity is a coil wound or stacked by a particular structure named EWOD wire, which is made by coating a soft insulating dielectric layer on a flexible conductive core. As a result, requirements for different lens designs can be achieved, and coating an insulating dielectric layer in complex cavities is not required. The optical performance of the CLL is measured with a clear aperture of 8 mm, which shows that the tunable range for the focal length is (−∞, −35 mm] ∪ [78 mm, +∞) at a voltage of 0–235 V, and the response time is less than 40 ms. |
---|---|
ISSN: | 2158-3226 2158-3226 |
DOI: | 10.1063/5.0082436 |