Effect of non-linear amplification of phase and amplitude modulations on laser-induced damage of thick fused silica optics with large beams at 351 nm

Nonlinear propagation of high power, large aperture laser beams leads to the amplification of the spatial pre-existing small scale modulations, and therefore locally increases the laser energy density as the beam propagates through the optical component. The measurement of the energy density distrib...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of applied physics 2018-10, Vol.124 (16)
Hauptverfasser: Veinhard, M., Bonville, O., Bouillet, S., Bordenave, E., Courchinoux, R., Parreault, R., Natoli, J.-Y., Lamaignère, L.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Nonlinear propagation of high power, large aperture laser beams leads to the amplification of the spatial pre-existing small scale modulations, and therefore locally increases the laser energy density as the beam propagates through the optical component. The measurement of the energy density distribution on the exit face of the tested component is therefore more challenging, as the impact of the propagation must be taken into account. It is for this reason that the damage densities of thick fused silica components have never been precisely measured. To this end, a dedicated imaging setup has been developed to accurately measure the energy density distribution on the exit face of 34-mm thick fused silica optical components during laser damage experiments with a centimeter-scale laser beam. The impact of nonlinear propagation on the beam spatial profile has been studied experimentally and confronted to numerical simulations that solve the nonlinear Schrödinger equation for the experimental spatial and phase profiles. The results clearly indicate that the imaging setup can accurately measure the amplification of the beam spatial modulations. The beam energy density on the exit face is therefore correctly measured and, for the first time, the damage density of thick optics can be accurately determined.
ISSN:0021-8979
1089-7550
DOI:10.1063/1.5049864