Surface passivation of III-V compound semiconductors using atomic-layer-deposition-grown Al2O3

Al 2 O 3 was deposited on In0.15Ga0.85As∕GaAs using atomic-layer deposition (ALD). Without any surface preparation or postthermal treatment, excellent electrical properties of Al2O3∕InGaAs∕GaAs heterostructures were obtained, in terms of low electrical leakage current density (10−8 to 10−9A∕cm2) and...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied physics letters 2005-12, Vol.87 (25)
Hauptverfasser: Huang, M. L., Chang, Y. C., Chang, C. H., Lee, Y. J., Chang, P., Kwo, J., Wu, T. B., Hong, M.
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Al 2 O 3 was deposited on In0.15Ga0.85As∕GaAs using atomic-layer deposition (ALD). Without any surface preparation or postthermal treatment, excellent electrical properties of Al2O3∕InGaAs∕GaAs heterostructures were obtained, in terms of low electrical leakage current density (10−8 to 10−9A∕cm2) and low interfacial density of states (Dit) in the range of 1012cm−2eV−1. The interfacial reaction and structural properties studied by high-resolution x-ray photoelectron spectroscopy (HRXPS) and high-resolution transmission electron microscopy (HRTEM). The depth profile of HRXPS, using synchrotron radiation beam and low-energy Ar+ sputtering, exhibited no residual arsenic oxides at interface. The removal of the arsenic oxides from Al2O3∕InGaAs heterostructures during the ALD process ensures the Fermi-level unpinning, which was observed in the capacitance-voltage measurements. The HRTEM shows sharp transition from amorphous oxide to single crystalline semiconductor.
ISSN:0003-6951
1077-3118
DOI:10.1063/1.2146060