Interfacial and microstructural properties of SrTiO3 thin films grown on Si(001) substrates
The microstructure and interfaces of SrTiO3 thin films directly deposited by metalorganic chemical vapor deposition on silicon (001) substrates were investigated by means of Bragg-diffraction contrast and high-resolution transmission electron microscopy. The observation of the plan-view specimens sh...
Gespeichert in:
Veröffentlicht in: | Journal of applied physics 2002-12, Vol.92 (12), p.7200-7205 |
---|---|
Hauptverfasser: | , , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The microstructure and interfaces of SrTiO3 thin films directly deposited by metalorganic chemical vapor deposition on silicon (001) substrates were investigated by means of Bragg-diffraction contrast and high-resolution transmission electron microscopy. The observation of the plan-view specimens showed that the SrTiO3 films are polycrystalline with randomly oriented grains. An amorphous layer was observed at the interfaces between the films and the substrates. The growth kinetics of this amorphous layer was investigated in detail. The thickness showed a rapid initial increase, which is much faster than the corresponding growth of amorphous SiO2 in the absence of precursors, and apparently approaches saturation after a short time. The thickness of the interfacial layer increases with the oxygen partial pressure during deposition and a reduction to a value acceptable for gate-oxide applications has been achieved for the minimum pressure given by the oxygen content of the present precursors. However, this comes at the cost of a dramatic increase of the carbon content of the film. |
---|---|
ISSN: | 0021-8979 1089-7550 |
DOI: | 10.1063/1.1522475 |