TaC as a diffusion barrier between Si and Cu
The reaction mechanisms and related microstructures in the Si/TaC/Cu metallization system have been studied experimentally and theoretically by utilizing ternary Si–Ta–C and Ta–C–Cu phase diagrams as well as activity diagrams calculated at 800 °C. With the help of sheet resistance measurements, Ruth...
Gespeichert in:
Veröffentlicht in: | Journal of applied physics 2002-04, Vol.91 (8), p.5391-5399 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The reaction mechanisms and related microstructures in the Si/TaC/Cu metallization system have been studied experimentally and theoretically by utilizing ternary Si–Ta–C and Ta–C–Cu phase diagrams as well as activity diagrams calculated at 800 °C. With the help of sheet resistance measurements, Rutherford backscattering spectrometry, x-ray diffraction, scanning electron microscopy, and transmission electron microscopy, the metallization structure with the 70 nm thick TaC barrier layer was observed to fail completely at temperatures above 725 °C because of the formation of large Cu3Si protrusions. However, the formation of amorphous Ta layer containing significant amounts of carbon and oxygen was already observed at the TaC/Cu interface at 600 °C. This layer also constituted an additional barrier layer for Cu diffusion, which occurred only after the crystallization of the amorphous layer. The formation of Ta2O5 was observed at 725 °C with x-ray diffraction, indicating that the oxygen rich amorphous layer had started to crystallize. The formation of SiC and TaSi2 occurred almost simultaneously at 800 °C. The observed reaction structure was consistent with the thermodynamics of the ternary system. The metallization structures with 7 nm and 35 nm TaC barrier layers failed above 550 °C and 650 °C, respectively, similarly because of the formation of Cu3Si. The high formation temperature of TaSi2 and SiC implies high stability of Si/TaC interface, thus making TaC layer a potential candidate to be used as a diffusion barrier for Cu metallization. |
---|---|
ISSN: | 0021-8979 1089-7550 |
DOI: | 10.1063/1.1464652 |