On-wafer characterization of thermomechanical properties of dielectric thin films by a bending beam technique
A bending beam technique has been developed for on-wafer characterization of thermomechanical properties of dielectric thin films including Young’s modulus (E), the coefficient of thermal expansion (CTE), and the Poisson ratio (ν). The biaxial modulus E/(1−ν) and CTE were determined by measuring the...
Gespeichert in:
Veröffentlicht in: | Journal of applied physics 2000-09, Vol.88 (5), p.3029-3038 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | A bending beam technique has been developed for on-wafer characterization of thermomechanical properties of dielectric thin films including Young’s modulus (E), the coefficient of thermal expansion (CTE), and the Poisson ratio (ν). The biaxial modulus E/(1−ν) and CTE were determined by measuring the thermal stresses of the dielectric film as a function of temperature on two different substrates. The Poisson ratio and Young’s modulus were determined by measuring the temperature dependence of the thermal stress of periodic line structures of the dielectric film. Three dielectric thin films were selected for this study, consisting of silica made from tetraethylorthosilane (TEOS), hydrogen silsesquioxane (HSQ), and biphenyltetracarboxylic dianhydride-p-phenylene diamine (BPDA-PDA). The deduced biaxial modulus and CTE are 77 GPa and 1.0 ppm/°C for TEOS, 7.07 GPa and 20.5 ppm/°C for HSQ, and 11.1 GPa and 3.4 ppm/°C for BPDA-PDA. The Poisson ratio is determined to be 0.24 and Young’s modulus is 59 GPa for the TEOS film. The error limit and the valid range of E/(1−ν) and CTE for applying this technique are also discussed. |
---|---|
ISSN: | 0021-8979 1089-7550 |
DOI: | 10.1063/1.1287771 |