Visible emission from electroluminescent devices using an amorphous AlN:Er3+ thin-film phosphor

Electroluminescence (EL) studies of AlN:Er alternating-current thin-film electroluminescent (ACTFEL) devices were performed at 300 K. Thin films of Er-doped AlN, ∼200 nm thick, were grown on indium–tin–oxide/aluminum–titanium–oxide/glass substrates using rf magnetron sputtering in a nitrogen atmosph...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied physics letters 2000-07, Vol.77 (4), p.478-479
Hauptverfasser: Dimitrova, V. I., Van Patten, P. G., Richardson, H. H., Kordesch, M. E.
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Electroluminescence (EL) studies of AlN:Er alternating-current thin-film electroluminescent (ACTFEL) devices were performed at 300 K. Thin films of Er-doped AlN, ∼200 nm thick, were grown on indium–tin–oxide/aluminum–titanium–oxide/glass substrates using rf magnetron sputtering in a nitrogen atmosphere. The turn-on voltage was found to be around 70–80 and 100 V for ACTFEL devices without and with a top insulator layer. Sharp emission lines in the visible region were observed which correspond to known transitions of the Er3+ ion. Temperature-dependent cathodoluminescence studies corroborate the EL results, and show that optimum device performance is attained near 300 K.
ISSN:0003-6951
1077-3118
DOI:10.1063/1.127016