3D-Printed glycerol microfluidic fuel cell

3D-Printed glycerol microfluidic fuel cell

A 3D-printed microfluidic fuel cell is presented. Fused deposition modeling is used to build a microchannel with a 0.015 cm 2 cross-sectional area for stable colaminar flow conditions. A new 3D-Printed cell fed by glycerol displays a power density of 175 mW cm −2 at 0.9 V and 1.8 V of open-circuit v...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Lab on a chip 2020-06, Vol.2 (12), p.257-261
Hauptverfasser: Guima, Katia-Emiko, Coelho, Pedro-Henrique L, Trindade, Magno A. G, Martins, Cauê Alves
Format: Artikel
Sprache:eng
Schlagworte:
Fuel cells
Fused deposition modeling
Glycerol
Microchannels
Microfluidics
Open circuit voltage
Rapid prototyping
Three dimensional flow
Three dimensional printing
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A 3D-printed microfluidic fuel cell is presented. Fused deposition modeling is used to build a microchannel with a 0.015 cm 2 cross-sectional area for stable colaminar flow conditions. A new 3D-Printed cell fed by glycerol displays a power density of 175 mW cm −2 at 0.9 V and 1.8 V of open-circuit voltage. 3D-Printed microfluidic fuel cell.
ISSN:1473-0197
1473-0189
DOI:10.1039/d0lc00351d