CO 2 Geostorage and Enhanced Oil Recovery: Challenges in Controlling Foam/Emulsion Generation and Propagation

CO injection in subterranean reservoirs for storage, oil recovery, or both is challenging because of its very high mobility. Using a CO foam or emulsion is a way to remedy this problem by increasing CO 's apparent viscosity. However, the generation of the foam and its propagation in porous media present several issues that have to be overcome for this process to be economically realistic in practice. For example, it may take time, i.e., a number of pore volumes to be injected, before the foam is created. It is the objective of this Article to investigate these issues thoroughly and to identify the mechanisms underlying them by looking at the effects of various parameters. It is found that surfactant adsorption on the surface of the rock is an important factor involved in the delay of foam formation, but this may not explain all of the results. The nature and morphology of the porous medium may be, in some cases, the dominant factors for foam generation and propagation. From an understanding of the origin of the encountered problem, relevant mitigation strategies are envisioned and evaluated. It is found, for example, that when appropriately formulated and injected with the proper process, foam or emulsion generation is strongly accelerated, which very significantly shortens the delay for achieving CO storage.