Low Contact Resistance WSe 2 p -Type Transistors with Highly Stable, CMOS-Compatible Dopants
High contact resistance has been a bottleneck in developing high-performance transition-metal dichalcogenide (TMD) based -type transistors. We report degenerately doped few-layer WSe transistors with contact resistance as low as 0.23 ± 0.07 kΩ·μm per contact by using platinum(IV) chloride (PtCl ) as...
Gespeichert in:
Veröffentlicht in: | Nano letters 2024-10, Vol.24 (43), p.13528-13533 |
---|---|
Hauptverfasser: | , , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | High contact resistance has been a bottleneck in developing high-performance transition-metal dichalcogenide (TMD) based
-type transistors. We report degenerately doped few-layer WSe
transistors with contact resistance as low as 0.23 ± 0.07 kΩ·μm per contact by using platinum(IV) chloride (PtCl
) as the
-type dopant, which is composed of ions compatible with the complementary metal-oxide-semiconductor (CMOS) fabrication process. Top-gated devices with a gate length of 200 nm showed good switching behaviors, implying that the dopant diffusion into the gate stack is not significant. The devices showed nearly identical performance after being kept in air for 86 days without any encapsulation while retaining the degenerately doped states at 78 K with pressure lower than 10
Torr, highlighting the stability of the dopants. The presented method sets forth the availability of highly stable methods for pattern doping the transistors with a thinned Schottky barrier width for low contact resistance devices. |
---|---|
ISSN: | 1530-6984 1530-6992 |
DOI: | 10.1021/acs.nanolett.4c02948 |