1,4-Di(3-alkoxy-2-thienyl)-2,5-difluorophenylene: A Building Block Enabling High-Performance Polymer Semiconductors with Increased Open-Circuit Voltages

A new building block, 1,4-di­(3-alkoxy-2-thienyl)-2,5-difluorophenylene (DOTFP) with several desirable features such as high backbone planarity, suitably lying highest occupied molecular orbital (HOMO), and good solubility, was developed by inserting an electron-deficient difluorophenylene into the 3,3′-dialkoxy-2,2′-bithiophene (BTOR) unit. Three regioregular D-A1-D-A2 type polymers based on DOTFP and benzothiadiazole (BT) derivatives were synthesized and characterized by comparing with a D–A type BTOR-based polymer. The content of highly electron-rich alkoxythiophene is reduced by half in the DOTFP-based polymers versus that of the BTOR-based polymer analogue, which results in a deeper HOMO level and benefits high open-circuit voltage (V oc) in polymer solar cells (PSCs). Consequently, the DOTFP-ffBT-based solar cells exhibited a significantly improved power conversion efficiency (PCE) of 8.7% and an increased V oc of 0.84 V compared to the BTOR-ffBT-based solar cells with a PCE of 2.6% and a V oc of 0.49 V. Additionally, the DOTFP-based polymers showed improved charge transport properties and film morphology than the BTOR-based polymer BTOR-ffBT, resulting in simultaneous enhancement of the short-circuit current (J sc) and fill factor (FF) in PSCs. These results demonstrate the great promise of the DOTFP building block for the construction of high-performance photovoltaic polymer semiconductors with increased V ocs.