Reexamining the Crystallization of Poly(ε-caprolactone) and Isotactic Polypropylene under Hard Confinement: Nucleation and Orientation

The crystallization of poly­(ε-caprolactone) (PCL) and isotactic polypropylene (iPP) infiltrated in nanoporous anodic alumina oxide (AAO) templates was reexamined to demonstrate the importance of obtaining polymer-free, clean AAO surfaces on the nucleation, size dependence of crystallization temperature (T c), and texture. The AAO pore diameters cover a broad range from 400 to 20 nm. When the AAO templates were completely free of any residual polymer on their surfaces, differential scanning calorimetry (DSC) experiments exhibited a single crystallization peak for all the samples with different AAO pore sizes. A drastic decrease in T c with density of domains indicated a transition from heterogeneous to homogeneous/surface nucleation. A regular decrease of T c with pore size was observed in the low T c regime, as a result of the volume dependence of nucleation events. The chain alignment of the two polymers infiltrated in AAO was studied by two-dimensional wide-angle X-ray scattering (WAXS). By comparing the experimental and simulated WAXS patterns, the orientation modes of the polymers were identified and compared with previous studies.