A Green and Cost-Effective Synthesis of Hierarchical SAPO-34 through Dry Gel Conversion and Its Performance in a Methanol-to-Olefin Reaction

In this work, a low-cost and high-performance methanol-to-olefin (MTO) catalyst was synthesized by dry gel conversion (DGC). Using tetraethylammonium hydroxide (TEAOH) as the structure-directing agent (SDA) to prepare the dry gel, nano-SAPO-34 in a range of 50–500 nm was synthesized under the effect of the vapor of triethylamine (TEA) and H2O. The TEAOH consumption using this method was only 7.5% of that in the hydrothermal synthesis (HTS), and the yield of nano-SAPO-34 products was up to 94%. When scaling up to the pilot test, obvious heterocrystals appeared with the decrease in SiO2 content in the dry gel. Our results showed that the heterocrystals were completely eliminated after the introduction of fluoride into the dry gel. A low acid density nanosheet-SAPO-34 molecular sieve product with good micropore, mesopore, and macropore connectivity was obtained. The obtained multikilogram-scale molecular sieve sample can be directly shaped to obtain MTO microsphere catalysts by spray drying without separation and washing. No wastewater was produced during the whole process, demonstrating an entirely green production way. The MTO performance of the microsphere catalysts was tested in a fluidized bed reactor, and results showed that the catalysts exhibited the characteristics of a slow carbon deposition rate and a high activity utilization ratio. Their lifetime was extended by 14%, and their selectivity (C2 = + C3 =) was increased by 1.55%, so they are very suitable for industrial application. This work has provided the theoretical and practical basis for the industrial production and application of DGC in the future.