Adsorption Characteristics of Bio-oil on Biochar in Bioslurry Fuels

This study reports the adsorption characteristics of bio-oil on biochar in biochar/bio-oil slurry (i.e., bioslurry) systems at three biochar loading levels (2.4, 4.8, and 16.7%, respectively). At low biochar loading levels (2.4 or 4.8%), heavy organic compounds (particularly those containing fused aromatic systems) in bio-oil was selectively adsorbed onto the biochar. Such selective adsorption also resulted in reduced concentrations of alkali and alkaline earth metallic (AAEM) species in the adsorbed bio-oil phase compared to that in the bio-oil blank. A comparison between the experimental and calculated distributions of AAEM species in bio-oil indicates that at least part of the AAEM species adsorbed on biochar is associated with heavy organic compounds. Consequently, such selective adsorption results in changes in the unadsorbed bio-oil phase that has decreased viscosity and aromaticity and increased polarity. It is interesting to note that the selective adsorption was weakened with an increasing biochar loading level in the bioslurry, and such a phenomenon was not observed in the bio-oil–water-soluble fraction (WSF)/biochar system because of the absence of fused aromatic compounds in the WSF.