A comprehensive analysis of guided-wave propagation in 3D-printed PLA plates with different infill densities – Experimental study

•Guided-wave propagation is characterized in 3D-printed plates with different infills.•A method to calculate phase velocity from the wave's time-spatial plot is introduced.•A method to experimentally determine dispersion curves and identify 5+ modes is shown.•Dispersion, slowness, tuning, and attenuation are highly affected by infill density.•Reference propagation characteristics for a wide range of infills are made available. Thanks to its many advantages, additive manufacturing (AM) is witnessing a gigantic shift from small applications to the production of complex industrial components, including safety–criticalapplications like aerospace and civil construction. This arises the need to develop accurate and robust technologies for evaluating and monitoring the structural integrity of AM components. The objective of this study is to comprehend how ultrasonic guided waves (GWs) propagate in 3D-printed poly(lactic acid) (PLA) plates of different infill densities. The experimental investigation involves five intact PLA plates printed with infill densities ranging from 20 to 100% at a step of 20%. A scanning laser Doppler vibrometer was used to visualize GW propagation by performing full-wavefield area-scans. Spatial-time, frequency-wavenumber, and wavenumber-wavenumber analyses were performed to scrutinize the availableGW modes and their slowness profiles within the anisotropic structure. In addition, the tuning of the fundamental Lamb-wave (LW) modes at different excitation frequencies was examined, and the amplitude attenuation of the generally most pronounced mode (A0 mode) was investigated for different infill densities at an excitation of 50 kHz. A reference methodology is presented to experimentallyidentify more than five propagating modes in the frequency-wavenumber domain then obtain their phase-velocity dispersion curves. Significant variations are observed in the dispersion characteristics when lowering the infill density leading to the appearance of more modes at lower cutoff frequencies and drops in both the group and phase velocities in most of the cases. A complex behavior of the guided waves was observed in the dispersion curves of the 20%-infill plate, with possible mode interruptions/disturbance at an excitation frequency beyond 70 kHz. The appearance of shear-horizontal modes is noticed/strengthened at oblique propagation directions which may be attributed to mode conversion of the LW modes after obliquely interacting with the internal stru