Effect of axial yarn distribution on the progressive damage behavior of braided composite tube subjected to three-point bending

The effect of axial yarns on progressive bending damage of braided composite tubes is studied in this paper. Four specimens with different number and distribution of axial yarns were experimentally tested by quasi-static three-point bending. At the same time, infrared thermography was used to observe the damage in-situ. Combined with the cross-section morphology of Ultra-Depth 3D Microscope, the damage evolution and distribution characteristics of braided tubes were identified. It is found that axial yarns enhance the mechanical properties of braided composite tube. The detected changes of infrared maximum temperature have a good correlation with the damage initiation and failure mechanism of the specimen. The abrupt changes of the maximum temperature indicate the occurrence of local fiber breakage, especially the axial yarn breakage. If there are axial yarns on the compression side of the tube, the maximum temperature increases by 0.5 °C in the linear elastic stage, and two initial damages of debonding and fiber breakage will occur. The debonding started at the interface of the axial yarn. The axial yarns increased fiber crimp, resulting in obvious wavy delamination between layers of the specimen, and the axial damage range was expanded. In addition, the mixed structure with axial yarns only on the compression side can inhibit the damage from spreading down the braided tube wall. •The progressive bending damage of triaxial braided tube was studied.•The abrupt change of infrared maximum temperature indicates local fiber breakage.•The mixed structure with axial yarns only in the upper half can inhibit damage spreading downward.