Evaporative cooling of the liquid film in slot channels with capillary-porous walls under natural convection

Implementation of resource-saving technologies can be based on improving the qualitative characteristics of heat and mass transfer equipment, which is widely used in power engineering, chemical, petrochemical, gas and food industries. One of the most effective ways of interaction between the coolant and the working medium is the direct contact of a gravitationally flowing liquid film and a gas. A promising method for passive intensification of heat and mass transfer between the liquid film and gas is the use of contact surfaces with regular roughness, with capillary-porous or mesh coating of channel walls. The launch and emergency stop of the heat and mass transfer device may generate a transition in the cooling mode of liquid from forced to natural convection. This leads to a change in the conditions of heat and mass transfer, and, consequently, to a change in the parameters of the coolant at the output of the device. In this case, using the dependences obtained for forced convection in the channel leads to a significant error in determining the parameters of the heat carrier. Therefore, in order to design and manufacture heat-mass-transfer units of contact type, one would need the information on the patterns of heat and mass transfer under different operating conditions. An important condition for ensuring the efficiency of contact-type devices is to know the features of the interaction between the liquid and gas mediums. The development of boundary layers in the film and gas leads to the need to allocate the initial thermal region and the stabilized heat and mass transfer region. These factors are not taken into account in the engineering calculation methods that exist today.