Creating an intermediate energy band to boost the photoelectrochemical efficiency of TiO2 for solar-driven hydrogen production

The utilization of photoelectrochemical processes for hydrogen generation from water and solar energy offers a promising avenue to replace non-renewable energy sources. Nevertheless, achieving high-performance photoanode electrodes poses a significant challenge. In this study, we present the synthesis cerium and chromium-doped TiO2 (CeCrTiO2) is produced through a simple, scalable, and cost-effective hydrothermal method on a fluorine-doped tin oxide (FTO) substrate. the introduction of Ce and Cr impurities is highlighted for its role in creating an impurity band within CeCrTiO2. This impurity band is instrumental in enhancing the separation and movement of electrons and holes, contributing to the improved performance of CeCrTiO2 as a photoanode in photoelectrochemical applications. Hence, the photocurrent density value of CeCrTiO2 is 4.5 times higher than that of bare TiO2. This suggests that CeCrTiO2 exhibits improved efficiency in generating a photocurrent when exposed to light, indicating enhanced photoelectrochemical performance. The amount of hydrogen produced by CeCrTiO2 is noted to be 4.88 times greater than that of bare TiO2. This highlights the material's effectiveness in harnessing solar energy to drive the water-splitting reaction, leading to a higher yield of hydrogen gas. The synthesis of CeCrTiO2 through a hydrothermal method results in a photoanode with significantly enhanced performance, positioning it as a promising candidate for advancing photoelectrochemical processes aimed at replacing non-renewable energy sources. Schematic representation of the synthesis process for CoCrTiO2. [Display omitted] •A highly efficient and stable Ce and Cr co-doped TiO2 photoanode was synthesized and tested.•The band gap of TiO2 was engineered through the doping process.•The CeCrTiO2 photoanode achieved a photocurrent density of 4.5 mA/cm2 at 1.13 V vs Ag/AgCl.•Hydrogen production using CeCrTiO2 as a photoanode reached 78 μmol/h·cm².