Atomic layer deposition of NiO applied in a monolithic perovskite/PERC tandem cell
Monolithic perovskite/silicon tandem photovoltaics have fueled major research efforts as well as gaining rapid industrial interest. So far, most of the literature has focused on the use of currently more expensive silicon heterojunction bottom cell technology. This work demonstrates a perovskite/sil...
Gespeichert in:
Veröffentlicht in: | Solar energy materials and solar cells 2023-10, Vol.261, p.112498, Article 112498 |
---|---|
Hauptverfasser: | , , , , , , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Monolithic perovskite/silicon tandem photovoltaics have fueled major research efforts as well as gaining rapid industrial interest. So far, most of the literature has focused on the use of currently more expensive silicon heterojunction bottom cell technology. This work demonstrates a perovskite/silicon tandem solar cell based on the industrially dominant passivated emitter and rear cell (PERC) technology. In detail, we investigate a tunnel recombination junction (TRJ) consisting of ITO/NiO/2-(9H-carbazol-9-yl)ethyl] phosphonic acid (2PACz) and compare it with an ITO/2PACz TRJ. Specifically, the NiO layer is deposited by atomic layer deposition (ALD). Although ITO/2PACz-based tandem devices can reach more than 24% conversion efficiency, we observe that they suffer from a large spread in photovoltaic parameters due to electrical shunts in the perovskite top cell, caused by the inhomogeneity of the 2PACz layer on ITO. Instead, when ALD NiO is sandwiched between 2PACz and ITO, the surface coverage of 2PACz improves and the yield of the devices, in terms of all device parameters, also improves, i.e., the standard deviation decreases from 4.6% with ITO/2PACz to 2.0% with ITO/NiO/2PACz. In conclusion, thanks to the presence of NiO, the TRJ consisting of ITO/NiO/2PACz leads to a 23.7% efficient tandem device with narrow device efficiency distribution.
•Champion 23.7% efficient perovskite-PERC tandem cell was achieved.•The developed thermal atomic layer deposition (ALD) process for NiO is reported.•ALD NiO was added to an ITO/SAM recombination junction to improve the device yield. |
---|---|
ISSN: | 0927-0248 1879-3398 |
DOI: | 10.1016/j.solmat.2023.112498 |