Enhancing conical solar still performance using high conductive hollow cylindrical copper fins embedded by PCM

[Display omitted] •The performance enhancement of a conical solar distiller is investigated.•High thermal-conductivity cylindrical copper fins filled with PCM have been used.•An experimental analysis was carried out.•Modified distillers that use copper tubes filled with PCM are highly beneficial. The present study aims to enhance the efficiency of the conical solar distiller in producing water during both day and night. This will be achieved through design enhancements, such as increasing the surface area of the distiller to maximize solar energy absorption and improve condensation rates. High thermal-conductivity cylindrical fins have been used, and their role will be investigated. These fins may be hollow and extended, with or without the inclusion of phase change material (PCM). Consequently, copper tubes are positioned at the base of the distiller basin, both with and without the inclusion of phase-changing paraffin wax material inside the hollow tubes. A comparison is made between the performance of three configurations: the first configuration is traditional, the second configuration includes fins without the incorporation of PCM, and the third configuration includes PCM-based fins. This comparison is crucial as it provides a clear understanding of the impact of each design enhancement on the distiller’s performance. The study findings indicated that the arrangement with hollow fins filled with PCM had the highest level of freshwater output. Furthermore, the results showed that the combined output of conical solar distillers equipped with fins made of copper tubes, both with and without PCM, were 7.50 and 6.75 L/m2/day, respectively. The cumulative production of conventional conical distillers is 4.85 L/m2/day. Freshwater output improved by 54.64 and 39.17 % when using hollow copper tubes with and without PCM within 24 h, compared with the conventional configuration. During night-time hours, it was observed that the freshwater output of distilled water from salt water significantly improved by 550 % when utilizing copper tubes loaded with PCM, compared to distillation using empty copper tubes. The maximum daily efficiency of conical distillers with fins with and without PCM were 73.6 % and 80.3 %, respectively. These results showed that conical distillers using copper tubes hollow filled with PCM represent good options for obtaining higher performance than distillation.