Regional spectral characteristics, quality factor and site responses in western-central Sichuan, China (II): Application to stochastic ground motion simulation

The stochastic finite-fault approach was used to model the 2022 Luding earthquake with a magnitude of Mw 6.6 in China at 16 selected near-field stations. To investigate the impact of the site effect on the synthetic results, two models were taken into account: One model was obtained from the generalized inversion technique, and the other model was obtained from the horizontal-to-vertical spectral ratio method. The high-frequency attenuation parameter was estimated to be 0.040 s and the value of 4.0 MPa for the stress parameter was adopted. Comparisons of the recorded and simulated Fourier amplitude spectrum, pseudospectral acceleration, peak ground acceleration, and peak ground velocity were performed to investigate the capability of the selected input parameters. In addition, the model bias, simulated peak ground acceleration and peak ground velocity were calculated by the local site amplification estimated by the two methods. The results show that the site effects estimated by the generalized inversion technique can well simulate the high-frequency response spectra and Fourier amplitude spectrum and can provide peak ground acceleration and peak ground velocity values consistent with the recorded values, while the local site amplification roughly calculated by the horizontal-to-vertical ratio method underestimates the main ground motion characteristics. Furthermore, strong-motion records with the same magnitude but different hypocentral distance ranges in the generalized inversion technique are used to estimate near-surface site effects, which shows that the distance range has a small impact on the estimation of local site amplification. Model parameters that performed well in this study provide confidence in understanding and quantifying seismic hazards in the Luding area from earthquake scenarios with different magnitudes. •Generalized inversion method was used to separate the source, site and path effects.•These input parameters were used to simulate the Luding earthquake in China.•The reliability of input parameters was verified in this simulation.•Regional site effects can be estimated using seismic records from nearby areas.