Heating performance of PCM radiant floor coupled with horizontal ground source heat pump for single-family house in cold zones

As the energy demand for space heating increases, the necessity for innovative and energy-efficient heating technologies has become more urgent. This study proposes and evaluates a heating system that integrates a phase change material radiant floor with a horizontal ground source heat pump (PCM floor-HGSHP, Case 1), intending to maintain indoor comfort temperatures and enhance energy efficiency through the utilization of renewable energy sources. Despite the considerable potential of PCM floors, their combination with HGSHP requires further research to fully unlock their benefits. The study involved simulating the PCM floor using a validated TRNSYS component and developing an advanced rule-based control strategy with time-of-use tariffs as a key input to optimize system operation. To elucidate and quantify the advantages of the PCM floor-HGSHP system and verify its applicability in cold regions of China, a single-family house was used as a case study building, four representative cities were selected, and two comparative simulation cases were defined, along with three key performance indicators. The results indicate that, compared with the radiant floor heating system with HGSHP (RFHS-HGSHP, Case 2), the incorporation of PCM in the floor of Case 1 improves the indoor temperature stability by 8.6 %, enhances the load flexibility by 18.1 %, and reduces the total operating costs by 13.8 %. Furthermore, relative to the PCM floor with air-to-water heat pump system (PCM floor-AWHP, Case 3), the proposed system which substitutes the AWHP with the HGSHP, extends the duration of indoor comfort temperatures by 9.6 % and decreases the system electricity consumption by 33.7 %. The proposed system demonstrates excellent thermal and energy performance across all selected cities, proving to be both technically feasible and significantly beneficial for maintaining indoor comfort temperatures and reducing operational costs. This study offers valuable insights and technical support for designing and optimizing residential heating systems in cold regions, thereby promoting the development and application of renewable energy sources. [Display omitted]