Laboratory testing of desiccation crack growth in terrestrial Martian analog environments using digital image correlation

The unique geologic features of raised ridges and polygonal cracks filled with multiple layers of cement observed in Gale and Jezero craters on Mars have origins that remain uncertain due to limited knowledge and measurement techniques. This study hypothesizes that these cracks result from the volumetric shrinkage of clay fabric due to dehydration and salinity fluctuations in ancient Martian lakes. The research aims to quantify the shrinkage of terrestrial simulants with varying mineral compositions analogous to those found at Gale Crater and Jezero Crater under diverse desiccation conditions. By simulating Martian regolith using the Rocknest soil simulant and examining historical aqueous conditions through sedimentary rock analogs, this study provides new insights into Martian geological structures. The extent and rate of shrinkage in simulant samples were quantified using ImageJ, while strain localization and propagation were measured using the Digital Image Correlation (DIC) technique until full desiccation crack patterns developed. Laboratory testing revealed that desiccation cracks tend to form polygonal patterns, which are patently similar to the polygonal patterns observed in some regions of Mars. However, not all simulants produced visible cracks, with some producing linear rather than polygonal patterns. Key findings indicate that higher temperatures result in wider and deeper cracks, while lower temperatures decrease crack density and length. Increased initial water content leads to more extensive cracking, with higher crack density and length per unit area. Sodium chloride and sodium sulfate significantly impact desiccation cracking, with low concentrations stabilizing the soil and high concentrations promoting extensive cracking. Smectite-rich samples exhibit extensive cracking, and tensile strain distribution during evaporation is non-uniform, influencing crack development based on sample properties and drying conditions. These insights enhance our understanding of polygonal crack formation on Mars, improving Mars sample return missions and informing the design of robust exploration equipment. •The study designed a specialized setup to mimic desiccation on Mars and study crack growth in Martian regolith simulants.•Physical and tensile properties of simulants were monitored using ImageJ and DIC setup combined with desiccation test.•Laboratory testing revealed polygonal crack patterns like those found on Mars, providing new insights for Mars mis