Relaxor-antiferroelectric hybrids for pyroelectric energy conversion from low-grade heat using flexible PVDF-TrFE-CTFE-NaNbO3 nanocomposite films

Nowadays, researchers focus more on developing smart materials that respond to different stimuli for harvesting energy output. In this paper, the pyroelectric energy harvesting capabilities of smart terpolymer poly(vinylidene-fluoride-trifluoroethylene-chlorotrifluoroethylene) [PVDF-TrFE-CTFE]-based nanocomposites have been investigated. Sodium niobate (NaNbO3) from the perovskite family is selected as the filler. The Sol-gel method is used to synthesise NaNbO3 nanoparticles, and solvent-cast films for different weight fractions (0–20%) of fillers have been fabricated. Structural, morphological, and dielectric properties of the polymer nanocomposite samples were done at room temperature. The ferroelectric properties of the terpolymer is improved with filler addition. The thermal stability of composite films was confirmed using differential scanning calorimetric (DSC) studies. The thermodynamic Olsen cycle was applied to nanocomposites for calculating the harvested energy output. Maximum energy density is obtained for higher filler loading (20 wt % sodium niobate). The operating temperatures were selected at 303 K and 333 K with an applied field of 130 kV/cm. The results show that including NaNbO3 in the relaxor terpolymer matrix considerably enhances the energy harvesting density of the nanocomposites, indicating that they are promising materials for designing thermally stable energy harvesting systems. [Display omitted] •Terpolymer nanocomposite films are fabricated using solvent casting method.•Electro active phase for energy conversion get enhanced with filler addition.•A low grade heat harvesting system is made using Olsen cycle based thermal energy conversion.•Composite films produced a maximum energy density of 68 J/L percycle at the selected electric fields.