Development of a water-based cooling system for the Muon Chamber detector system of the CBM experiment

A water-based cooling system is being investigated to meet the cooling requirement of the Gas Electron Multiplier (GEM) based Muon Chamber (MuCh) detector system of the Compressed Baryonic Matter (CBM) experiment at GSI, Germany. The system is based on circulating cold water through the channels inside an aluminium plate. The aluminium plate is attached to a GEM chamber. A feasibility study is conducted on one small and two real-size prototype cooling plates. A microcontroller-based unit has been built and integrated into the system to achieve automatic control and monitoring of temperature on the plate surface. The real-size prototypes have been used in a test beam experiment at the CERN SPS (Super Proton Synchrotron) with the lead beam on a lead target. A setup using three prototype modules has been prepared in the lab for testing in a simulated real-life environment. This paper discusses the working principle, mechanical design, fabrication, and test results of the cooling prototypes in detail.