3D morphological evolution of the Fe-Rich phase and mechanical properties of the recyclable A356 alloy

Efficient utilisation of recycled aluminium promotes low-carbon and green manufacturing in the aluminium industry. However, the low tolerance of Al for Fe content limits its application. The morphological evolution of the Fe-rich phase and the mechanical properties of recycled A356 alloys with varying Fe contents were investigated using optical microscopy (OM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), synchrotron radiation X-ray computed tomography (SRXCT), and Thermo-Calc thermodynamic calculations. The results show that with increasing Fe content, the morphology of the Fe-rich phase transformed from fine-granular and short rod-like structures into coarse needle-like and Chinese-script. In three dimensions (3D), the larger Fe-rich phases displayed a multibranched structure composed of rod-like and plate-like phases rather than a single morphology. Notably, at an Fe content of 0.4 %, the Fe-rich phases presented Chinese-script and short rod-like shapes in sections but did not significantly change the 3D morphology or type of the Fe-rich phase. However, the Fe-rich phases in the 0.4 %Fe alloy exhibited higher thickness and sphericity, which improved the ductility of the alloy. Thermodynamic calculations indicate that the initial formation temperature of the Fe-rich phase in the 0.4 % Fe alloy overlaps with that of the Al-Si eutectic reaction, which is referred to as the critical Fe content. At the critical Fe content, the ternary eutectic reaction of Al-Si-(AlFeSi) suppressed the rapid growth of the Fe-rich phase and mitigated their negative impact on ductility. [Display omitted]