Preparation and magnetic properties of high DC-bias performance Fe-Si-Nb-B-Cu/carbonyl iron chip inductors

In this study, a gradient temperature rise technique was employed to prepare ultra-fine nanocrystalline alloy magnetic powder with excellent high-frequency and low-loss characteristics. It was found that increasing the holding time effectively refines the grain structure in the perpendicular direction of the Fe-Si-Nb-B-Cu alloy's (220) crystal plane. This refinement contributes to a reduction in eddy current losses within the soft magnetic composite material. The addition of carbonyl iron to the nanocrystalline magnetic powder resulted in further enhancements in the density, strength, and magnetic properties of soft magnetic composites under high-frequency magnetic fields. Consequently, soft magnetic composites exhibiting superior DC bias performance were successfully obtained, with a power loss of 2629.50 kW/m3 at a magnetic induction of 20 mT and a frequency of 3 MHz, and more than 70 % percent permeability in a DC biased magnetic field of 7.96 kA/m. The relationship between relative permeability and quasi-static hysteresis loops was established. Additionally, the dynamic hysteresis loops of the soft magnetic composites revealed a relaxation phenomenon, which elucidated the mechanism behind the variations in power loss with changes in magnetic induction strength and frequency. Finally, through simulations, it was determined that the number of turns and the winding method significantly influenced the internal magnetic field and inductance of the chip inductor. Utilizing this information, a chip inductor with ultra-small inductance, compact size, and excellent DC bias characteristics for 10 A circuits was successfully fabricated. [Display omitted]