Effect of precipitation hardening on the microstructure, mechanical, and corrosion properties of additively manufactured A20X aluminum alloy

The effect of age hardening treatment on microstructure, tensile properties, and corrosion behavior of additively manufactured A20X alloy was investigated. Three single-step aging temperatures (150 °C, 175 °C, and 200 °C) and one double-step aging temperature (pre-aging at 165 °C followed by aging at 185 °C) along with varying heat treatment durations ranging from 30 min to 144 h, were studied systematically. Microstructural characterizations revealed that the co-existence of coherent/semi-coherent (Ω, θ′) and incoherent precipitates (θ) resulted in the maximum hardening effect (up to 30 % higher microhardness). This improved the yield strength at room and 150 °C by 33.4 % and 22.6 %, respectively. Double aging delivered the best combination of microstructure with fine grains and optimal precipitate assembly in a short duration (12–16 h). The heat-treated LPBF A20X showed higher ductility and similar mechanical properties compared to the cast A20X. However, optimal precipitate characteristics reduced the corrosion potential by 13–16 % due to a higher galvanic reaction. The highest corrosion potential (−0.622 V) was achieved in the solutionized state.