Influence of IDS and SDS compound ratio on pore structure and wettability of bituminous coal and anthracite: Experimental and simulation discussion

•The optimal ratio of IDS and SDS is determined to be 1:3.•The pore characteristics of bituminous coal and anthracite are divided.•The combination of IDS and SDS has a good synergistic effect on expanding the pore structure of coal.•The regulation mechanism of IDS and SDS on the wettability of coal is discussed. The pore and wetting characteristics of bituminous coal and anthracite treated with different proportions of tetrasodium iminodisuccinate (IDS) and sodium dodecyl sulfate (SDS) were measured. The pore structure characteristics of the coal were studied via low-temperature nitrogen adsorption analysis and the Frenkel-Halsey-Hill fractal theory. Zeta potential measurements were conducted to quantitatively analyze the degree of aggregation or dispersion of coal particles dissolved in solution. Changes in the coal surface morphology were observed and analyzed by scanning electron microscopy (SEM). The results show that when the ratio of IDS:SDS is 1:3, the specific surface area (SSA) values of bituminous coal and anthracite are the lowest. The composite reagent has a greater effect on improving the pore structure of anthracite than bituminous coal. Compared with bituminous coal, anthracite has better pore connectivity and a wider pore network. The absolute zeta potentials of bituminous coal and anthracite reach the maximum at an IDS:SDS ratio of 1:3, with values of 91.08 mV and 91.35 mV, respectively. The electrostatic potential distributions of the molecules show that the advantages of the electrostatic potential difference with water molecules enable IDS and SDS molecules to effectively attract water molecules and form hydrogen bonds, thus revealing the optimization mechanism of coal wettability.