Experimental study on thermophysical properties of alumina nanoparticle enhanced ionic liquids

In this experimental study, several alumina Nanoparticle Enhanced Ionic Liquids were prepared and studied in regard to their stability, pH, density and thermal conductivity. These new fluids were manufactured by dispersing aluminium oxide nanoparticles in different mixtures based on water and 1-ethyl-3-methylimidazolium methanesulfonate ionic liquid. Furthermore, thermophysical properties (density, thermal conductivity) of pure and binary mixtures with water and 1-ethyl-3-methylimidazolium methanesulfonate were studied in order to select and propose base fluids to design new advanced heat transfer fluids. The pH of the dispersions was determined as around 8.0–8.5. In regard to density, the overall [C2mim][CH3SO3] density is higher by 25% than that of water and the influence of ionic liquid density over the mixtures was found to be much higher than that of water, while for the alumina Nanoparticle Enhanced Ionic Liquids the density respects classical equations. Evaluation of thermal conductivity revealed an increase of up to 13% in thermal conductivity when nanoparticles are added to the base fluids and new correlations based on mass fraction and temperature were proposed. •Ionic liquid-water mixtures were prepared.•pH of developed new fluids is measured and good stability is noticed.•Al2O3 NEIL density is experimentally examined and good agreement with existing equations was noticed.•Al2O3 NEIL thermal conductivity is experimentally examined and an enhancement was noted.•Al2O3 NEIL thermal conductivity correlations are proposed.