TiO2 nanorods doped with g-C3N4 – Polyethylene composite coating for self-cleaning applications

Visible-light-absorbing graphitic carbon nitride–TiO2 nanorod nanomaterials (g-C3N4@TiO2NR) were successfully immobilized using a one-step UVA-induced photocatalytic procedure on commercially obtained flexible low-density polyethylene (LDPE) films. Self-cleaning properties were evaluated in solid–liquid and solid–gas phases using malachite green as a model molecule under UV-A and visible light irradiation. For comparison purpose, LDPE films containing P25 TiO2 nanoparticles was prepared using the same synthetic strategy (P25/LDPE). Among the fabricated films, the g-C3N4@TiO2NR/LDPE films exhibited the highest photocatalytic activity both in solid–liquid and solid–gas phases after 120 min of visible light irradiation (λ > 455 nm) removing efficiently malachite green stains probably due to the attack of photoinduced reactive oxygen species (ROS) such as singlet oxygen (1O2), hydroxyl radical (•OH) and superoxide anion radical (O2−•). Furthermore, the g-C3N4@TiO2NR/LDPE films retained their visible-light-photoinduced photocatalytic properties after four reuse cycles. The g-C3N4@TiO2NR/LDPE films also exhibited significant visible-light-photoinduced hydrophilicity. The high visible-light-photoinduced photocatalytic capacity of g-C3N4@TiO2NR/LDPE films was found to be related to the textural and electronic properties, superior visible-light absorption, and surface roughness of the films. [Display omitted] •Visible-light active g-C3N4@TiO2 nanorod were photocatalytically immobilized on LDPE.•g-C3N4@TiO2NR/LDPE films exhibited enhanced visible-light photocatalytic activity.•Visible-light-photoinduced wettability was observed in g-C3N4@TiO2NR/LDPE films.•Films exhibited high visible-light photocatalytic activity after four reuse cycles.