Origin and distribution of grain-coating and pore-filling chlorite in deltaic sandstones for reservoir quality assessment
Grain-coating chlorite preserves porosity and permeability through the inhibition of quartz cement whereas pore-filling chlorite blocks pore-throats and diminishes reservoir quality. The aim of this study is to determine the origin and principal mechanisms which govern the distribution of grain-coat...
Gespeichert in:
Veröffentlicht in: | Marine and petroleum geology 2021-12, Vol.134, p.105326, Article 105326 |
---|---|
Hauptverfasser: | , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Grain-coating chlorite preserves porosity and permeability through the inhibition of quartz cement whereas pore-filling chlorite blocks pore-throats and diminishes reservoir quality. The aim of this study is to determine the origin and principal mechanisms which govern the distribution of grain-coating and pore-filling chlorite in Jurassic deltaic sandstones (Tilje Formation, Smørbukk field, Mid Norwegian Shelf). The study focussed on very high-density sampling for petrographic analysis, from three sections of sandstone core from the same well with contrasting reservoir quality, rather than the low-density sampling approach typically employed. The aim was to gain new understanding of specific controls on porosity and permeability based on core description, core analysis measurements and a suite of petrographic techniques. Results of this study show grain-coating chlorite originated from the thermally-driven recrystallisation of detrital clay coats and/or clay mineral precursors. Pore-filling chlorite has principally derived from the ductile deformation of chlorite-rich Fe-ooids, that were possibly reworked from a proximal evaporitic setting. The distribution of chlorite precursor material, detrital clay coats, and subsequently the distribution of grain-coating and pore-filling chlorite, were controlled by the relative dominance of tidal and fluvial processes active during sediment deposition. Optimum grain-coating chlorite is found in tidal-fluvial sandstones with moderate fluvial influence. Pore-filling chlorite is pervasive in tidal-fluvial channel sandstones deposited during periods of high fluvial discharge, or proximal to the central turbidity maximum zone; marked by an abundance of fluid mud. Tidal channel sandstones with no fluvial influence are pervasively quartz cemented due to an absence of grain-coating chlorite. Grain-coating chlorite and good reservoir quality occurs in heterolithic distributary mouth bar sandstones, however mixing of mud- and sand-prone facies due to intense bioturbation has reduced permeability. Results from this study can be used to predict reservoir quality in the Smørbukk field and in analogous shallow-marine sandstones worldwide.
[Display omitted]
•Chlorite has inhibited quartz cement growth in Tilje Fm (Haltenbanken, Norway) sandstones at >4,200 m and >150 °C.•High-density sampling for petrographic and petrophysical analysis was used to study grain-coating chlorite.•Grain-coating and pore-filling chlorite was controlled |
---|---|
ISSN: | 0264-8172 1873-4073 |
DOI: | 10.1016/j.marpetgeo.2021.105326 |