Enhanced struvite (MgNH4PO4·6H2O) granulation and separation from synthetic wastewater using fluidized-bed crystallization (FBC) technology

Struvite (MgNH4PO4·6H2O) could be recovered from wastewater containing phosphorus and showed high potential as an alternative source of phosphorus fertilizer. A comparison of batch experiment and continuous crystallization processes was carried out using batch reactor and fluidized bed reactor (FBR)...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of water process engineering 2023-07, Vol.53, p.103855, Article 103855
Hauptverfasser: Ha, Thi-Hanh, Mahasti, Nicolaus N.N., Lin, Cai-Sheng, Lu, Ming-Chun, Huang, Yao-Hui
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Struvite (MgNH4PO4·6H2O) could be recovered from wastewater containing phosphorus and showed high potential as an alternative source of phosphorus fertilizer. A comparison of batch experiment and continuous crystallization processes was carried out using batch reactor and fluidized bed reactor (FBR) methods, respectively. The continuous crystallization processes for phosphorus granulation were conducted both in a seeded (FBC) and unseeded (FBHC) system. Various seed materials such as dolomite-(CaMg(CO3)2), CaHPO4, and SiO2 were applied as seed material in FBC. In the batch reactor, the operating parameters, including pH, [Mg]0/[P]0 molar ratio, and initial phosphorus concentration were first optimized. The effects of the coexisting ions (SO42−, Cl−, NO3−, Na+, K+, Ca2+) and organic pollutants (Ethylenediaminetetraacetic acid-EDTA, and Citric acid) on phosphorus-containing wastewater treatment were also examined. The hydraulic parameters of FBR (Fluidized-bed reactor), including effluent pHe, and cross-sectional surface loading (L, kg m−2 h−1) were investigated to recover phosphorus and ammonium as struvite pellets. Under optimum conditions (pHe 8.8, [Mg]0/[P]0 = 1.3/1, L = 2.4 kg-P m−2 h−1), FBC using dolomite as seed resulted in higher phosphorus removal efficiency than the FBHC system with total removal (TR) = 93.0 % and a crystallization ratio (CR) = 85.0 %. As confirmed by the XRD pattern, the solid products consist of magnesium ammonium phosphate (MgNH4PO4·6H2O) from both FBC and FBHC processes. The high crystallization ratio (CR = 85 %) and the recovery of crystal pellets (>1 mm) in the FBC process reduce the production of sludge compared to traditional chemical precipitation and FBHC processes. [Display omitted] •Phosphorus removals in the batch and continuous fluidized processes were studied.•The product was crystal MgNH4PO4·6H2O with the average size of 1.0 mm in FBR system.•Hydraulic optimization of FBC using dolomite as seed led to 93 % phosphorus removal and 85 % crystallization.
ISSN:2214-7144
2214-7144
DOI:10.1016/j.jwpe.2023.103855