Functionalized bentonite for removal of Pb(II) and As(V) from surface water: Predicting capability and mechanism using artificial neural network
An efficient material is required to develop effective removal systems with high flexibility and low cost for capturing toxic ions. In this study, a synthesized lanthanum oxide-modified bentonite (B-La) adsorbent was used for the adsorption of As(V) and Pb(II). The prepared material, B-La, shows a f...
Gespeichert in:
Veröffentlicht in: | Journal of water process engineering 2023-02, Vol.51, p.103386, Article 103386 |
---|---|
Hauptverfasser: | , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | An efficient material is required to develop effective removal systems with high flexibility and low cost for capturing toxic ions. In this study, a synthesized lanthanum oxide-modified bentonite (B-La) adsorbent was used for the adsorption of As(V) and Pb(II). The prepared material, B-La, shows a feather shape surface with a 25 nm average particle size and was also confirmed by SEM and TEM. Texture and chemical composition confirmed by XRD and FTIR. From the XPS investigation, the underlying mechanism for Pb(II) and As(V) removal was investigated, and the production of B-La-As(V) and B-La-Pb(II) inner-sphere complexation was shown to be the dominating pathway. As per the pH effect studies, it was observed that B-La efficiently adsorbed Pb(II) and As(V) over a pH range of 6.0. Pb(II) adsorption was not substantially impacted by ionic strength or coexisting ions; however, As(V) adsorption was influenced by phosphate and fluoride, showing that B-La has a strong affinity towards Pb(II) and As(V). A pseudo-second-order model could well fit Pb(II) and As(V) adsorption, and Langmuir equilibrium adsorption describes Pb(II) and As(V) adsorption. The adsorption capacity was 147.05 mg of Pb(II)/g and 156.26 mg of As(V)/g, reflected at the dosage of 0.2 g/L at 25 °C, pH 6.0. Using the response surface methodology, the optimum values for process parameters, such as initial concentration, temperature, pH, and time, for both Pb(II) and As(V) removal are identified. Desorption studies were also performed to confirm the presented B-La adsorbents' environmental suitability. The Pb(II) and As(V) were completely desorbed with 0.2 M HNO3 and 0.2 M NaOH; after washing with water, it is ready to reuse in the next cycle and can be reused in several cycles of Pb(II) and As(V) adsorption operations. The identified data-driven quadratic model strongly correlated with the experimental values. Machine-learning techniques like artificial neural networks (ANN) and adaptive neuro-fuzzy inference systems (ANFIS), based on results ANN predicted model shows high correlation R2 value for both metal ions. All the findings indicated that porous B-La was a promising material for Pb(II) and As(V) removal.
[Display omitted]
•Developed low-cost novel La-doped bentonite (B-La) composite for As(V) and Pb(II) remediation.•BaLa has 99 % removal with an adsorption capacity of 147.05 mg Pb(II)/g and 156.26 mg As(V)/g.•The results suggest inner-sphere complexation was dominating pathway for metal remova |
---|---|
ISSN: | 2214-7144 2214-7144 |
DOI: | 10.1016/j.jwpe.2022.103386 |