Effect of the cooling behavior on phase transformation and mechanical property of RAFM steel

The phase transition behavior of RAFM steel during Hot Isostatic Pressing (HIP) diffusion bonding process would extensively impact the service performance of blanket component in the future fusion reactor. In this paper, the influence of cooling behavior on phase transformation and mechanical proper...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of nuclear materials 2024-11, Vol.600, p.155272, Article 155272
Hauptverfasser: Wang, Qiaoling, Wang, Wanjing, Wang, Jichao, Du, Peisong, Xu, Huaqi, Yu, Ziyang, Xu, Yuping, Zhou, Haishan, Luo, Guangnan
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The phase transition behavior of RAFM steel during Hot Isostatic Pressing (HIP) diffusion bonding process would extensively impact the service performance of blanket component in the future fusion reactor. In this paper, the influence of cooling behavior on phase transformation and mechanical property of RAFM steel was studied using a combination of Electron Backscatter Diffraction (EBSD) and a thermal dilatometer. The results show that as the cooling rate decreases after austenitizing, the phase category transitions from a single-phase of martensite to the dual-phase of martensite and ferrite, along with an increase in the rate of ferrite, minor martensite packets and high-angle grain boundaries (HAGB). As the cooling rate decreases, the initial temperature for martensite transformation significantly increases, and the transformation driving force slowdown. Moreover, specimens processed with HIP cooling show lower strength, higher elongation, and a greater standard deviation of hardness compared to air cooling. These differences can be attributed to the formation of ferrite and the diffusion of carbon atoms within martensite. The research findings reveal the phase transition and microstructural evolution of martensite under varying cooling conditions, providing a reference for the controlling the cooling process after HIP bonding of blanket steel components in the future fusion reactor.
ISSN:0022-3115
DOI:10.1016/j.jnucmat.2024.155272