Twinning, slip and size effect of phase-transforming ferroelectric nanopillars

Ferroelectric materials are widely used in energy applications due to their field-driven multiferroic properties. The stress-induced phase transformation plays an important role in the functionality over repeated and consecutive operation cycles, especially at the micro/nanoscales. Here we report a systematic in-situ uniaxial compression tests on cuboidal Barium titanate (BaTiO3) nanopillars with size varying from 100 nm to 3000 nm, by which we explore the stress-induced transformation and its interplay with plastic deformation. We confirm the superelasticity achieved in pillars by martensitic phase transformation from tetragonal to orthorhombic. There exists a critical size, 330 nm, for the yield stress. Above 330 nm, martensitic phase transformation aids slip along the plane with a low Schmid factor, in turn, the pseudo-compatible twins form within the shear band. The scaling exponent of size-dependent yield strength is found to be exactly 1. For nanopillars smaller than 330 nm, no twins form, only slips with large Schmid factors are activated, and size effect vanishes. All pillars with sizes from 100 nm to 300 nm achieve the theoretical yield limit around 9 GPa. Our experimental results uncover the interplay between twins and slips in BaTiO3 nanopillars, which pave the way for the optimization of microstructure design of ferroelectric materials for microelectronic applications at small scales.