Synergistic modification of Ti/PbO2 electrodes with metal ions (Nd, Al, Bi) and STAB surfactant for electrocatalytic treatment of desulfurization wastewater

In this study, PbO2 electrodes are modified by co-doping with different metallic elements (Nd, Al, Bi) and stearyl trimethyl ammonium bromide (STAB) using the electrodeposition method. The modified electrodes, designated as Ti/PbO2-Nd-STAB, Ti/PbO2-Al-STAB, and Ti/PbO2-Bi-STAB, are then applied in the electrochemical degradation of desulfurization wastewater. The surface morphology, crystal structure, and elemental valence of the prepared electrodes are analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Their electrochemical performance and stability are assessed by linear sweep voltammetry (LSV), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and accelerated life testing (ALT). The results reveal that modification with metallic elements and STAB significantly enhances the physicochemical and electrocatalytic performance of the Ti/PbO2 electrode. Among the modified electrodes, the Ti/PbO2-Nd-STAB electrode exhibits the most compact and homogeneous surface morphology, the highest oxygen evolution potential (OEP, 2.33 V vs. SCE), the lowest chlorine evolution potential (CEP, 1.44 V vs. SCE), the largest electrochemically active surface area, the lowest charge transfer resistance, the highest electrochemical stability, and a prolonged accelerated life (65 h, which is 17 h longer than that of the unmodified electrode). Further, the optimal electrochemical oxidation process parameters for desulfurization wastewater are determined as follows: current density = 50 mA/cm2, temperature = 35 ℃, electrode spacing = 3.0 cm, and stirring rate = 300 rpm. After 300 min of electrolysis, the Ti/PbO2-Nd-STAB electrode achieves a Cl− removal rate of 86.9 % and a chemical oxygen demand (COD) removal rate of 71.2 %. After 10 cycles, the Cl− and COD removal rates decrease by 2.8 % and 1.8 %, respectively. Besides, Tafel curve analysis indicates that the chlorine evolution reaction follows the Volmer-Tafel mechanism, with the recombination of adsorbed Cl− ions on the surface oxidation film being the rate-determining step. Overall, the Ti/PbO2-Nd-STAB anode exhibits immense application potential in the treatment of desulfurization wastewater. ●Research focuses on the synergistic effect of co-doping Ti/PbO2 electrodes for wastewater treatment.●Modified electrodes show excellent stability and electrocatalytic efficiency.●Electrocatalytic oxidation efficiently removes COD and converts Cl⁻.