CeO2 enhanced performance of NiFe2O4-CaO for carbon capture and in-situ hydrogenation conversion to CO

NiFe2O4 exhibits excellent redox properties and is widely applied in CaO-NiFe2O4 chemical looping processes. However, rapid sintering of Ni-Fe alloy under reaction conditions limited its industrial applications. The CeO2-NiFe-CaO were synthesized through a physical mixing method with NiFe2O4 as a precursor, and its CO2 capture capacity and in-situ hydrogenation performance were conducted on ICCC-RWGS reaction under different conditions. 20CeO2-NiFe-CaO exhibited a CO yielding of 9.35 mmol/g at 650 °C. During the carbon capture stage, CO2 was adsorbed by CaO, leading to the formation of CaCO3. In the hydrogenation conversion stage, hydroxyl groups were generated on the surface, combining with CaCO3 to produce formate species, further generating H2O and CO. 15CNF-CaO exhibited superior cyclic ICCC-RWGS reaction performance compared to 15NF-CaO, with a CO yield of 1.88 mmol/g after 40 cycles. CeO2 inhibited the sintering of catalytic components, preserving a higher specific surface area and smaller particle size. Furthermore, CeO2 in 15CNF-CaO inhibited carbon deposition and enhanced in-situ hydrogenation performance, exhibiting better CaO regeneration capability and better cyclic stability. These results could provide insight for designing the DFMs for the ICCC-RWGS process. [Display omitted] •CeO2-NiFe2O4-CaO were prepared through the physical mixing method.•20 %CeO2-NiFe2O4 achieved the highest CO yielding of 9.35 mmol/g.•CeO2 hinders the Ni-Fe alloy sintering while inhibiting carbon deposition.