Preparation of porous α-Fe2O3 thin films for efficient photoelectrocatalytic degradation of basic blue 41 dye

A novel method was developed for the preparation of porous hematite (α-Fe2O3) thin films. First, a solution containing iron precursor was spin-coated on fluorine-doped tin oxide substrate and later short heat-treated at 750 °C. The prepared α-Fe2O3 thin films were applied as dual-function catalyst in photoelectrochemical (PEC) water oxidation and textile dye degradation studies. For the first time, α-Fe2O3 thin films were used in efficient PEC degradation of a textile dye (Basic Blue 41 – B41) using in-situ generated reactive chlorine species. In comparison with photocatalytic and electrocatalytic approaches, the PEC technique allows faster degradation of B41 dye at an applied bias potential of 1.5 V versus reversible hydrogen electrode and under visible light illumination. In the presence of Cl− using the PEC approach the degradation of B41 reaches 99.8%. High-performance liquid chromatography coupled with UV–VIS system confirmed the degradation of B41 dye using PEC. Gas-chromatography coupled to mass spectrometry was used to study the by-products obtained during PEC degradation. Chemical oxygen demand analyses confirmed that the mineralization level of B41 is in the order of 68%. The α-Fe2O3 films developed in this study give a higher level of PEC degradation efficiency compared to other iron oxide-based systems. [Display omitted] •Preparation of α-Fe2O3 thin films were achieved using combined spin-coating and short heat treatment approaches.•α-Fe2O3 thin films show good stability against photocorrosion.•PEC using α-Fe2O3 thin films present a promising way for degradation of a Basic Blue 41 dye with free chlorine species.•HPLC and GC-MS studies confirmed the degradation of Basic Blue 41 dye.