Effect of the lid-driven on mixed convection in an open flexible wall cavity with a partially heated bottom wall

The FSI-mixed convection heat transfer in a lid–driven vented cavity is studied in the present work. The heat source is set partially on the base of the cavity; the left flexible wall is cold, while the remaining walls are adiabatic. The top wall of the cavity moves in different cases depending on its movement; stationary wall (case 0), moving to the left (case I) and moving to the right (case II). The arbitrary Lagrangian-Eulerian formulation and finite element method are utilized to solve the governing equations. A two-dimensional incompressible laminar flow with an unsteady-state condition is used in the present model. The effects of relevant factors like the Richardson number 0.01≤ Ri ≤ 100 and the ratio of the velocities of moving top wall to that of the air entering the cavity, which is governed by Reynolds numbers ratio 1 ≤ Rer ≤ 4 have been studied. The outcomes demonstrate the feasibility of using a flexible wall and a special movement of the top wall. The percentage increase of the Nusselt number due to the flexible wall alone is about 4.5% while when the top wall moving to the left (case I), the augmentation rises to 28%. [Display omitted] •Fluid-structure interaction FSI module analysis.•Studing effect of Lid–driven on mixed convection in the vented cavity.•Evaluating the effects of the Rer and Ri on Nu number.•Thermal performance criterion.•Cavity's flexible wall was investigated.