Experimental study on dynamic deformation and breaking mechanism of high-temperature hard rock cutting by abrasive water jet

The development of deep geothermal resources encounters challenges related to high temperatures and hard reservoir rocks. Abrasive water jets (AWJ) offer a potential solution to enhance the efficiency of breaking high-temperature hard rocks in deep ground. This mainly originated from their combined characteristics of jet cooling impact and high-speed abrasive grinding. In order to investigate the dynamic deformation process and rock-breaking mechanism of high-temperature hard rocks cut by AWJ, laboratory tests were conducted on high-pressure abrasive water jets cutting granite, sandstone, and marble. Rock strains were monitored using dynamic strain gauges and the digital image correlation (DIC) technique. The results indicate that in the process of abrasive jet cutting high-temperature hard rock, the rock strain is divided into three stages: compression deformation, deformation release, and stable deformation. The strain response zone can be divided into strain concentration zone, strain transition zone, and strain weak response zone. The high strain region and heat exchange region of high-temperature hard rock during AWJ cutting process are almost consistent. Jet vaporization weakens the water cushion effect during the water hammer stage, leading to high strain concentration at the stagnation point of the jet. During the stagnation stage, the fluid weakens the binding of particles, the abrasive becomes more divergent, and the range of high strain response region expands. Unlike the dynamic strain generated by jet erosion of hard rock, when jet cutting rocks, the strain in the vertical jet direction is generally greater than that along the jet direction. The cutting effect increases with the increase of rock temperature. When the rock temperature is 300 °C, the cutting depth of sandstone, granite, and marble increases by 50 %, 120 %, and 180 %, respectively. Under the combined effects of high-frequency jet impact, high-speed abrasive grinding, and thermal stress, hard rock undergoes varying degrees of damage and failure.