Measurements of fuel thickness for prefilming atomisers at elevated pressure

•High resolution, quantitative liquid thickness measurements for engineering flows.•Fuel inertia/surface tension force balance defines fuel behaviour at prefilmer tip.•Upstream aerodynamic/hydrodynamic boundary conditions linked to primary atomisation.•Invariance in primary atomization statistics with gas pressure. This work describes an experimental study of the fuel flows on the prefilmer of an aerospace gas turbine airblast atomiser at elevated pressure. The work identifies the physics leading to contradictory findings within the literature. This concerns an important atomisation boundary condition, whether the thickness of the fuel film on the prefilming surface influences the downstream drop size distribution. Analysis of the experimental data shows that fuel film thickness becomes uncorrelated with the downstream drop size if surface tension forces dominate inertia at the prefilmer tip. Fuel film thickness however provides the initial length scale for primary atomization if fuel inertia exceeds surface tension forces. It is the high inertial conditions that are associated with gas turbine operation, but the low inertial conditions that are readily achievable at laboratory scale through momentum flux scaling. Additionally, a detailed statistical description of the fuel flow has been provided for the atomiser tested. This reveals the importance of upstream hydrodynamic and aerodynamic boundary conditions on the probability of a ligament forming. Surprisingly, operating pressure is shown to have limited effect on the probability of ligament formation, a significant advantage for future modelling of the primary atomization processes.