Effects of ammonia addition on soot formation in ethylene laminar diffusion flames. Part 2. Further insights into soot inception, growth and oxidation

•The key soot dynamics processes affecting the SVF were studied.•NH3 addition inhibits the soot formation in the ethylene laminar diffusion flame.•NH3 addition reduces soot inception, surface growth and oxidation rate.•The inhibited surface growth caused by NH3 dominates the inhibition of soot forma...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Fuel (Guildford) 2023-01, Vol.331, p.125623, Article 125623
Hauptverfasser: Zhang, Kai, Xu, Yishu, Liu, Yang, Wang, Huakun, Liu, Yimin, Cheng, Xiaobei
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:•The key soot dynamics processes affecting the SVF were studied.•NH3 addition inhibits the soot formation in the ethylene laminar diffusion flame.•NH3 addition reduces soot inception, surface growth and oxidation rate.•The inhibited surface growth caused by NH3 dominates the inhibition of soot formation.•The inhibition of the HACA reaction is the main reason for the reduced soot formation. Ammonia, as an alternative fuel, is attracting unprecedented attention due to the absence of CO2 emission during its combustion. Effects of ammonia co-firing on soot formation in ethylene laminar diffusion flames have been studied in the first part of this series of papers, addressing the soot volume fraction change and reaction kinetics of gaseous soot precursors. This paper further investigates the effect of ammonia on evolution behaviors of soot particle, namely soot inception, growth and oxidation in the ethylene co-flow diffusion flame. The soot volume fraction (SVF) and spatial distribution in flames without/with ammonia addition (5 and 20 vol%) were measured using laser-induced incandescence (LII) method. A newly constructed C2H4/NH3/PAHs kinetic model consisting of 163 components and 1018 reactions and the CoFlame codes dedicated to simulating laminar co-flow diffusion flame coupled with fixed sectional soot particle model were used to model the flames and soot inception, surface growth, and oxidation processes in them. Numerical results well captured the experimental observation on both peak SVF and flame height, and confirmed that ammonia inhibited the soot formation in the flame, showing a peak SVF decrease of 2–4 % per 1 % ammonia addition. The numerical results revealed that the ammonia addition inhibited all soot inception, surface growth via HACA (hydrogen-abstraction-acetylene-addition) and PAH condensation, and oxidation via OH/O2 processes. Most importantly, inhibition of HACA reactions induced by ammonia was identified as the main reason for reducing soot formation. Kinetic analysis revealed that adding ammonia created a new pathway to consume H radical while decreasing the rate of H radical-generating reactions, leading to a decrease in H radical and ultimately a reduction in the HACA reaction rate.
ISSN:0016-2361
DOI:10.1016/j.fuel.2022.125623