Bacterial cellulose nanocrystals or nanofibrils as Pickering stabilizers in low-oil emulsions: A comparative study

This investigation assessed the potential of bacterial cellulose (BC) in two distinct forms, nanocrystals (BC-NC) and oxidized nanofibrils (BC-NF), as stabilizers for low oil-in-water emulsions (1 % v/v). The research explored the impact of ionic strength and BC concentration on the physico-chemical characteristics, stability, and rheological properties of those emulsions. Nanofibrils had diameters ranging from 25 to 146 nm and lengths in the micrometer range, while nanocrystals varied in length from 133 to 870 nm and in diameter from 20 to 60 nm. Both BC-NF and BC-NC exhibited high zeta potential values (>−45 mV) and contact angles of 30-31°, indicating stability. Both nanocelluloses were effectively used as stabilizers in Pickering emulsions, namely in low-oil systems, producing small emulsion droplets with sizes between 1.42 and 4.13 μm. Further results revealed that ionic strength influenced emulsion stability, with both BC-NF and BC-NC preferentially located on the surfaces of emulsion droplets in the presence of salt, as demonstrated by microscopy images. The presence of BC at the interface contributed to creating a more robust barrier against coalescence and Ostwald ripening, influencing droplet size and rheological properties. Higher BC concentrations (1 %) increased emulsion stability in the absence of salt, while at lower BC concentrations (0.5 %), salt concentration was determinant for the long-term stability of the emulsions. These findings provide valuable insights into the production of Pickering emulsions using nanocelluloses, highlighting the advantages of bio-based nanomaterials for applications in the food industry. [Display omitted] •Bacterial nanocellulose acts as a stabilizer of low oil (1%) Pickering emulsions.•Nanofibrils or nanocrystals (1 %) stabilize emulsions even in the absence of NaCl.•At low nanocellulose concentrations (0.5 %), NaCl enhances emulsion stability.•Under centrifugal forces, 1% nanofibrils were able to keep emulsion's stability.•Stability and rheological properties can be controlled using nanocelluloses.