Stressing state evolution characteristics of I-section CFRP laminates revealed by thermodynamic modeling

I-section carbon fiber reinforced polymer (I-CFRP) laminates are widely used as hatch and cargo doors of wide-body airliners. However, estimating the loading capacity of I-CFRP laminates has always been empirically dependent since there is no uniform failure criterion for composite materials. This study attempts to reveal the failure characteristic points of I-CFRP laminates from a thermodynamic perspective. First, the test strain data can be modeled as state variables, thus equating the loaded engineering structure to a thermodynamic system. Based on the relation of state variables, matrices (Modes) and Hamiltonians (Characteristic parameters) that characterize the overall stressing state evolution of the specimen can be established. Integrating the Hamiltonians of each part into the whole is similar to the group representation and renormalization of Wilson's phase transition theory. Applying the clustering analysis (CA) criterion in combination with the bifurcation and transition of the mode and characteristic parameter curves reveals the phase transformation loads of the specimen. The accuracy and stability can be verified for the phase transition loads before and after the renormalization transformation. In conclusion, this study reveals the deformation-failure law of I-CFRP laminates from the thermodynamic perspective, which provides a new reference and method for the design of composite laminates. [Display omitted] •Eleven I-CFRP laminates axial compression tests were conducted.•Modeling the behavior of I-CFRP laminates from a thermodynamic perspective.•Propose a matrix representation (Mode) and Hamiltonian (Characteristic parameter) of the I-CFRP laminates' stressing state.•Reveal the phase transition point of I-CFRP laminates: EPB and FS points.