Improving source inversion performance of airborne pollutant emissions by modifying atmospheric dispersion scheme through sensitivity analysis combined with optimization model

Estimating accurately airborne pollutant emissions source information (source strength and location) is important for achieving effective air pollution management or adequate emergency responses to accidents. Inversion method is one of the useful tools to identify the source parameters. The atmospheric dispersion scheme has been proven to be the key to determining the source inversion performance by influencing the accuracy of the dispersion models. Modifying the atmospheric dispersion scheme is an important potential method to improve the inversion performance, but this has not been studied previously. To fill this gap, a novel approach for parameter sensitivity analysis combined with an optimization method was proposed to improve the source inversion performance by optimizing empirical scheme. The dispersion coefficients σy and σz of the typical BRIGGS scheme under different atmospheric dispersion conditions were optimized and used for air pollutant dispersion and source inversion. The results showed that the prediction performance of the air pollutant concentrations was greatly improved with statistical indices |FB| and NMSE decreased by 0.22 and 2.07, respectively; FAC2 and R increased by 0.10, and 0.08, respectively. For source inversion, the results of the significance analysis suggested that the accuracy in the source strength and location parameter (x0) were both significantly improved by ∼271% (relative deviation reduced from 60.0% to 16.2%) and ∼121% (absolute deviation reduced from 27.6 to 12.5 m). The improvement of source strength inversion accuracy was more significant under unstable atmospheric conditions (stability class A, B, and C); the mean absolute relative deviation was reduced by 97.5%. These results can help to obtain more accurate source information and to provide reliable reference for air pollution managements or emergency response to accidents. This study provides a novel and versatile approach to improve estimation performance of pollutant emission sources and enhances our understanding of source inversion. [Display omitted] •A sensitivity analysis–optimization model is proposed to optimize dispersion scheme.•An optimized scheme for dispersion coefficients σy and σz is proposed.•The optimized scheme produced more accurate predictions for pollutant concentration.•Source strength inversion accuracy was significantly improved by ∼271%.•Source inversion accuracy was better improved in unstable atmospheric conditions. Summary of the